IPM CNC turret punch press safe operating procedures different

1 operator must undergo specialized training, punch the strict examination and certification, postoperative, the rest of the staff does not allow the operation. 2 punch computer floppy disk must be dedicated disk, 3 Fixed parameters do not need to be modified 4 machine began to carefully review the screen information, such as warnings, punch immediately […]

The oiling method and the processing mode of the punch press when installing the punch press

High-speed punch in the match mode with the implementation of high-speed stamping delivery, raw materials in continuous feeding, the mold and the material relative conflict will be great heat, then not only IPM punch punch punch will effect the quality of products, not to mention IPM punch will Greatly reducing the use of continuous mode […]

Common Inspection Method for Failure of CNC Feeder

When the CNC machine alarm, maintenance personnel in no hurry to deal with, and should be observed and tested to find the correct fault location, commonly used diagnostic methods are generally under the punch manufacturers: 1, intuitive method Sensory organs, note CNC feeder fault phenomena, such as failure without sparks, lights, abnormal noise, the smell […]

Three – dimensional CNC drilling machine for power requirements

The rapid development of high-speed processing technology, three-dimensional CNC drilling machine CNC system part of the operating data, set the data and processing procedures are generally stored in the RAM memory, the system power, the backup battery or lithium battery to maintain. , Three-dimensional CNC drilling machine downtime is relatively long, plug the power supply […]